Banshizzle
08-05-2008, 02:50
This picture show you the setup of our raid, and this is the tactic that we came up with.
http://img88.imageshack.us/img88/4977/vistrixfi4.jpg
setup:
4 tanks
50% Meele/casters
Why 4 tanks?
We have 2 tanks starting off the fight, making sure tank nr.2 draw agro from the first tank if the debuff is about to kill tank number 1.
The reason why we have 4 tanks, is simply just incase some of the other tanks die, we have some tanks to replace.
We have 1 person in the raid, calling then Vistrix is casting stun, and when every meele are stunned. When that is done, the first caster in the Vistrix Bane setup will run (from the brown dot on map, the pictire in this thread) and into the meele group. The bane is a cone, so you have to stand in front of all meele. It's also important that EVERY meele stay as close to the tank as possible. When meele are unstunned, run to the side to don't get breath.
Now someone on VT will call who is the next "vistrix bane unstunner" and the fight continue like this.
At 75, 50 and 25% there will spawn a lot of adds, simply make sure every meele dps run out from Vistrix, and help with killing the adds. They should go down very fast without any problem. Tryo to time the 75/50/25% with the stun, so meele don't get stunned when they run out. We normally stop dps when hes on 77% to make sure we get the stun first, then run out.
This is what all the fight is about, just focus on those things, make sure the peope with Vistrix bane know what they are doing.
------------------------------------------------------------
Important Noted
There may happen that Vistrix patrol, just suddently out of nowhere. If he does that, DON'T run after him. Let him patrol, and he will come back to the tank again. If you are unlucky, then he will do the stun when he is patrolling, and that will most likely cause a wipe.
If you experience that Vistrix reset, it's cause the dps draw agro, and Vistrix can't reach the target.
Now have fun with the fight, its really easy
good luck!
http://img88.imageshack.us/img88/4977/vistrixfi4.jpg
setup:
4 tanks
50% Meele/casters
Why 4 tanks?
We have 2 tanks starting off the fight, making sure tank nr.2 draw agro from the first tank if the debuff is about to kill tank number 1.
The reason why we have 4 tanks, is simply just incase some of the other tanks die, we have some tanks to replace.
We have 1 person in the raid, calling then Vistrix is casting stun, and when every meele are stunned. When that is done, the first caster in the Vistrix Bane setup will run (from the brown dot on map, the pictire in this thread) and into the meele group. The bane is a cone, so you have to stand in front of all meele. It's also important that EVERY meele stay as close to the tank as possible. When meele are unstunned, run to the side to don't get breath.
Now someone on VT will call who is the next "vistrix bane unstunner" and the fight continue like this.
At 75, 50 and 25% there will spawn a lot of adds, simply make sure every meele dps run out from Vistrix, and help with killing the adds. They should go down very fast without any problem. Tryo to time the 75/50/25% with the stun, so meele don't get stunned when they run out. We normally stop dps when hes on 77% to make sure we get the stun first, then run out.
This is what all the fight is about, just focus on those things, make sure the peope with Vistrix bane know what they are doing.
------------------------------------------------------------
Important Noted
There may happen that Vistrix patrol, just suddently out of nowhere. If he does that, DON'T run after him. Let him patrol, and he will come back to the tank again. If you are unlucky, then he will do the stun when he is patrolling, and that will most likely cause a wipe.
If you experience that Vistrix reset, it's cause the dps draw agro, and Vistrix can't reach the target.
Now have fun with the fight, its really easy
good luck!